Ridgid OL90150 Air Compressor Manual

The Ridgid OL90150 is a powerful air compressor designed for both professional and DIY use. With a 1.5 HP motor and a 6-gallon tank, it provides a reliable source of compressed air for various applications, including inflating tires, powering pneumatic tools, and more. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating Instructions 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 1.5 HP motor, 6-gallon tank, oil-free pump, quick-connect coupler, pressure gauge, and safety valve.

Feature	Description
1.5 HP Motor	Powerful motor for efficient air compression
6-Gallon Tank	Provides a good balance between portability and air supply
Oil-Free Pump	Requires less maintenance and is easier to use
Quick-Connect Coupler	Allows for easy attachment of air hoses and tools
Pressure Gauge	Displays current air pressure for monitoring
Safety Valve	Prevents over-pressurization for user safety

Installation

Unpack and inspect the air compressor. Place it on a stable surface away from moisture.

Connect the air hose to the quick-connect coupler.
Ensure the compressor is plugged into a grounded outlet.
Check that the pressure gauge is functioning properly.
Turn on the compressor and allow it to build pressure.

WARNING! Ensure the compressor is placed in a well-ventilated area to avoid overheating.

First-Time Setup

Power on the compressor; follow the setup instructions provided in the manual.

Set the desired pressure using the pressure regulator.
Connect your pneumatic tools to the air hose.
Test the compressor by running a tool to ensure proper operation.

CAUTION! Always wear safety goggles when operating pneumatic tools.

Specifications

Motor Power: 1.5 HP.
Tank Capacity: 6 gallons.
Max Pressure: 125 PSI.
Weight: 50 lbs.
Dimensions: 24 x 18 x 18 inches.
Noise Level: 68 dBA.
Power Source: 120V AC.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge displays the current tank pressure.

Tip: Adjust the pressure regulator to set the desired output pressure for your tools.

Connecting Devices

Ensure the compressor is off before connecting any devices. Use the quick-connect coupler for easy attachment.

Turn off the compressor and disconnect the power.
Attach the air hose to the quick-connect coupler.
Connect your pneumatic tool to the other end of the air hose.
Power on the compressor and set the desired pressure.

Tip: Always check for leaks after connecting devices.

Operating Instructions

To operate the compressor, follow these steps:

Ensure the tank is filled with air.
Connect your tool and set the pressure.
Turn on the compressor and use your tool as needed.
Monitor the pressure gauge during operation.

WARNING! Do not exceed the maximum pressure rating of your tools.

Maintenance

Regular maintenance is essential for optimal performance. Follow these guidelines:

Drain the tank after each use to prevent moisture buildup.
Check and clean the air filter regularly.
Inspect hoses and connections for wear and tear.
Store the compressor in a dry place when not in use.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Always wear appropriate safety gear and ensure proper ventilation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
No air pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Loose parts	Tighten all screws and bolts.
Overheating	Blocked ventilation	Ensure vents are clear and clean.

Service: For support, contact Ridgid customer service.