Ridgid Mobil Air OF60150HV Air Compressor Manual

The Ridgid Mobil Air OF60150HV is a portable air compressor designed for various applications, including powering pneumatic tools, inflating tires, and more. This model features a 6-gallon tank, a powerful 1.5 HP motor, and a maximum pressure of 150 PSI. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 6-gallon tank, 1.5 HP motor, maximum pressure of 150 PSI, easy-to-read pressure gauge, and a durable design for portability.

Feature	Description
6-Gallon Tank	Provides ample air supply for various tasks.
1.5 HP Motor	Delivers powerful performance for demanding applications.
150 PSI Maximum Pressure	Allows for efficient operation of pneumatic tools.
Easy-to-Read Pressure Gauge	Helps monitor air pressure levels easily.
Portable Design	Lightweight and compact for easy transport.

Installation

Unpack and inspect the compressor. Place it on a stable surface away from moisture.

Connect the air hose to the compressor outlet.
Ensure the drain valve is closed before starting.
Plug the compressor into a grounded outlet.
Check for any leaks before use.

WARNING! Ensure the compressor is on a stable surface to avoid tipping.

First-Time Setup

Power on the compressor; follow the setup instructions.

Set the desired pressure using the regulator.
Connect your pneumatic tool to the air hose.
Turn on the compressor and allow it to build pressure.
Check for proper operation of the connected tool.

CAUTION! Do not exceed the maximum pressure rating of your tools.

Specifications

Tank Capacity: 6 gallons.
Motor Power: 1.5 HP.
Maximum Pressure: 150 PSI.
Weight: Approximately 40 lbs.
Dimensions: 24 x 18 x 20 inches.
Power Source: 120V AC.
Operating Temperature: 32°F to 104°F.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The pressure gauge displays the current tank pressure.

Safety Features: Includes a thermal overload protector and a safety valve.

Connecting Devices

Connect pneumatic tools using the air hose provided.

Ensure the compressor is off before connecting.
Match the hose fittings to the tool.
Turn on the compressor to supply air to the tool.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

To operate, turn on the compressor and allow it to reach the desired pressure.

Monitor the pressure gauge during operation.
Adjust the regulator as needed for your tool.
Turn off the compressor when finished.

WARNING! Do not operate in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Drain the tank regularly to prevent moisture buildup.
Check and replace air filters as needed.
Inspect hoses and connections for wear.

CAUTION! Always unplug before performing maintenance.

Safety Information

Read all safety instructions before operating the compressor. Use appropriate personal protective equipment (PPE) when using pneumatic tools.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hose.
Excessive noise	Loose components	Tighten screws and check for loose parts.
Tank won't fill	Faulty pressure switch	Replace pressure switch if necessary.

Service: For assistance, contact Ridgid customer support.